Volvo EC360B Excavator Engine Controller/ Monitor/ Hydraulic Controller Error Codes
If a Volvo EC360B excavator malfunctions, an error code will be displayed on the monitoring instrument cluster panel. If the meaning of these error codes is not understood, the machine will operate seriously abnormally.
To make it easier for you to understand these error codes, deal with the faulty machine promptly, replace appropriate parts, and ensure the normal operation of the excavator, Aprilparts will introduce to you the error codes displayed on the Volvo EC360B excavator instrument monitoring panel in this blog. Hope this helps.
First, we need to introduce the meaning of the combination of letters in the second and third digits of the fault code:
-
MID: Message Identification Deion (indicating control component identification). Each control component has a unique number.
-
PID: Parameter Identification Deion (represents the identification of parameters/values). Each parameter has a unique number.
-
PPID: Proprietary Parameter Identification Deion (represents Volvo’s unique parameter value/identification). Each parameter has a Volvo unique number.
-
SID: Subsystem Identification D eion (represents component identification). The SID numbers are determined by which control component (MID) they are transmitted from. Each control component has its sequence of SID numbers. The exceptions are the SID numbers 151-255, which are common to all systems.
-
PSID: Proprietary Subsystem Identification Deion. (Indicating Volvo’s unique component identification).
-
FMI: Failure Mode Identifier (indicating the type of fault identified).
The following are error codes related to Volvo EC360B excavator, which are divided into 128 engine controller (computer board), 140 monitor (display), and 187 hydraulic controller (computer board).
Volvo EC360B Excavator Error Code (128 Engine Controller)
| Error Code | Fault |
| 128 PID45 | Intake air heater |
| 128 PID94 | fuel delivery pressure |
| 128 PID98 | Engine oil level |
| 128 PID102 | Boost pressure (ER44) |
| 128 PID91 | accelerator pedal position |
| 128 PID97 | Water in the fuel indicator |
| 128 PID100 | engine oil pressure |
| 128 PID105 | Intake manifold temperature (ER42) |
| 128 PID107 | air filter |
| 128 PID110 | coolant temperature |
| 128 PID153 | crankcase pressure |
| 128 PID172 | Intake air temperature |
| 128 PID175 | Engine oil temperature (ER41) |
| 128 SID1 | Injector #1 |
| 128 SID3 | Injection #3 |
| 128 SID5 | Injector #5 |
| 128 SID17 | fuel shut-off valve |
| 128 SID21 | engine camshaft position |
| 128 SID23 | rack actuator |
| 128 SID64 | Injection stamping pump timing sensor |
| 128 SID211 | Sensor supply voltage #2 (+5VDC) |
| 128 SID232 | Sensor power supply 5V |
| 128 SID250 | Data communication J1587(ER14) |
| 128 SID254 | Inside the engine controller (ER12) |
| 128 PID108 | Atmospheric pressure |
| 128 PID111 | coolant level |
| 128 PID158 | Battery power |
| 128 PID174 | fuel temperature |
| 128 PPID19 | Internal EGR status |
| 128 SID2 | Fuel injection pot #2 |
| 128 SID4 | Fuel injection #4 |
| 128 SID6 | Injector #6 |
| 128 SID20 | timing actuator |
| 128 SID22 | Engine crankshaft position (ER43) |
| 128 SID24 | rack position sensor |
| 128 SID70 | Intake air heating driver #1 |
| 128 SID231 | Data communication J1939(ER13) |
| 128 SID240 | Programming memory (ER12) |
| 128 SID253 | Calibration memory EEPROM (ER12) |
| 128 PSID201 | CAN J1939 communication with V-ECU |
Volvo EC360B Excavator Error Code (140 Monitor)
| Error Code | Fault |
| 140 SID231 | Data connection J1939 |
| 140 SID240 | programming memory |
| 140 SID250 | Data connection J1587 |
Volvo EC360B Excavator Error Code (187 Hydraulic Controller)
| Error Code | Fault |
| 187 PID96 | Fuel Level |
| 187 PPID1121 | Boost solenoid valve |
| 187 PPID1123 | Hydraulic oil cooler solenoid valve |
| 187 PPID1128 | Float position solenoid valve |
| 187 PPID1134 | X1 flow control switch |
| 187 PPID1190 | Power conversion PPV valve (ER31) |
| 187 SID231 | Teaching data communication J1939(ER13) |
| 187 SID250 | Data communication J1587(ER14) |
| 187 SID253 | VECU calibration memory EEPROM (ER11) |
| 187 PPID1114 | Oil cooler PPV |
| 187 PPID1122 | Combined cut-off solenoid valve |
| 187 PPID1125 | Start lock relay |
| 187 PPID1133 | Engine speed control switch |
| 187 PPID1156 | Hydraulic oil temperature |
| 187 PPID1191 | Flow control PPV valve (ER32) |
| 187 SID240 | VECU programming memory for ER11) |
| 187 SID251 | VECU power supply EER21) |
| 187 SID254 | Inside the VECU controller (187 no signal) |
| 187 PSID200 | Data communication J1587 |
| 187 PSID202 | Data communication J1587 |
If you want to know more about Hitachi excavator error codes and troubleshooting, just feel free to contact us at sales@aprilparts.com. We’re glad to help.
Related Articles:
-
Volvo L90 E-ECU SID 022 Error Code
-
Caterpillar 320D Failure Mode Identifier
-
Analysis of Some Fault Code Cases of Hitachi Excavator
-
How to deal with Komatsu Excavator E05 Error Code
-
Kobelco SK200-10 Excavator Engine & Hydraulic Controller Error Code
-
Hitachi ZX470-5G Direct Injection Excavator Error Code List PDF
Leave a Reply
Want to join the discussion?Feel free to contribute!